woodpowertools

Lookin' for power tools? Our huge selection of brand name discount power tools are off the chain mang! Power tools are essential for creating things fast, so click here and get a power tool and/or power tools for the lowest discount prices online! Enter here

Most light-duty cab/chassis have standard cab-to-axle (CA) dimensions: 60, 84, 108 and 120 inches. The CA is the distance from the back of cab to the center of the rear axle. Typically the 60-inch measure is used for a 10-foot body, 84-inch for a 12-foot body, 108-inch for a 14- or 15-foot body, and 120-inch for a 15- or 16-foot body.You can use a four-door, 4x4 cab/chassis up to the 84-inch CA, but beyond that you may run into an overload situation. Be very cautious with the larger 14- to 16-foot bodies, even with a two-door unit. Bodies are fabricated many different ways: formed or extruded construction; steel, stainless steel or aluminum; and varying thicknesses. All these things will have an effect on the weight of your body. Aluminum weighs approximately 40% less than steel or stainless steel, allowing for more equipment storage or personnel in the long run.

Maintaining the machineIf possible, store the washer indoors in the off-season to avoid damage to the pump, hoses and spray wand. Otherwise, winterize them using only antifreeze designed for recreational vehicles (RVs); see Photo 6. When a gas-powered washer won''t be used for a month or more, prevent damage to the engine by draining the system of gas or adding a gas preservative to the fuel tank.1 TO START a gas-powered washer: (1) Clean any debris from the inlet filter. (2) Connect any accessories (like this chemical injector). (3) Run water through the washer for one minute to prime the system and remove any air. (4) Squeeze the spray wand trigger to bleed water pressure, and (5) pull the starter cord to start the engine.